断路器柜设计：紧凑、可靠、操作界面友好 

用于传输电能的配电柜通常由大量的分配电柜和负载组成，因此，特别需要设备具有长期的可靠性和安全性。也就是说，进线、联络和馈电回路的功能必须长期可靠的运行。其维护和测试只能在较短的停机时间内完成。

SIVACON-8PV的断路器柜设计完全满足上述要求：

a)   经过完整的型式试验的标准化设计，具有高度的安全性。

b)   柜门关闭时，具有试验和隔离位置，在隔离位置柜门才能打开。

c)   占地面积小，最小安装面积仅为400&tiMES;400ｍｍ。

d)   具有相互隔离独立的功能室、开关设备室、二次辅助器件室和出线/进线连接室，可实现出线/进线的上出进和下出进。

e)   对于各个额定的电流等级，优化电缆或母排的连接条件。

Design of breaker: compact, reliable, operation-friendly.                                        

The distribution cabinet which is used to transmitting electricity lOAds heavy for it is composed of many smaller distribution cabinets, therefore , it needs long-term reliability and safety. That is to say, the functions of wires and feed loop must run reliably for a long time. Its mAIntenance and inspection must be conducted in a very short time.

The design of SIVACON-8PV breaker can completely meet the above requirements：

ａ、standardized design and safe

ｂ、when the door of the cabinet is closed, it will indicate “test” or “ separation” . Only indicating “separation” can the door be opened.ｃ、occupying area is small, the smallest installation area is only 400×400ｍｍ;

ｄ、It has a separated function room, a switch

equipment room , a secondary supplementary

instrument room and a wires room where wires can

be drawn out from the top and the bottom.

ｅ、as to different rated current levels , it can optimize the conditions for cable and bus sheet.

免责声明：本文所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并立即删除内容。