用途:

本机用于挤制胎面，内胎，垫带，胶管等橡胶半成品。

USE:

The machine is used for the extrusion of half-finished rubber products such as tire tread,inner tube,rim band and rubber tube.

结构特点:

1 本机可分别配置内胎，胎面或者根据用户需要配置其他机头。
2 机身没有测温和温度显示装置;直径150以上喂料段装有旁压辊以增加喂料能力。
3 螺杆和衬套均经过氮化处理，具有足够的强度和耐磨性。
4 减速机配有强制润滑装置，具有传动效率高，使用寿命长，噪音小等优点。
5 直径150以上机型配有变频调速电机。
6 喂料辊为侧开式结构，便于清胶。

Structural:

1 The machine is equipped with inner tube and tire tread extrusion heads ,and can also be equipped with other extrusion heads as required by users.
2 A machine body temperature measuring and indicating device is installed.The feeding zone over 150 is equipped with side rolls for the enhancement of feeding capability.
3 The screws and bushes are subjected to nitrogenation treatment to get enough strength and wear-resistance.
4 The reducer has a forced lubrication unti,which is featured by high transmission efficiency,long service life and low noise.
5 The machine over 150 is driven by a variable-speed motor.
6 The side rolls are designed as side-open type for easy rubber removal.