FEATURE&SPECIFICATIONS:

》Model Designation: FTC-357C                        

》Rated Voltage: 220V~, 50Hz

》Rated Current: 1.0A                                        

》Rated Power: 190W

》Automatic reset thermal overlOAd protector

》Heavy duty,gearless,direct drive,powerful motor

》Operation Duration:Continuous

》Built-in Pressure Switch

   Cut-in Pressure: 90PSI  

   Cut-out Pressure: 125PSI

GENERAL SAFETY INSTRUCTIONS FOR COMPRESSORS

 warningPlease read the following instructions carefully, fAIlure to do so could lead to serious personal injury. Read all these instructions before operating this product and save these instructions.

1.KNOW YOUR COMPRESSOR

  Before operating this compressor, read and fully understand the starting, operating and stopping sections in this manual. Read all labels affixed to the compressor. Learn its applications and limitations.

2.SERVICING AND MAINTENANCE

Do not service or maintain this compressor until you have read and understood the maintenance section of this manual.

3.CHECK DAMAGED PARTS

Before further use of this compressor, a guard or any other part that is damaged should be carefully checked to ensure that it will operate correctly and perform its intended function. Check for alignment of moving parts, breakage of parts and any other conditions that may effect its operation. A guard or other part that is damaged should be properly repaired or replaced.

4.DISCONNECT FROM POWER SUPPLY

Before servicing, maintaining or replacing damaged parts always disconnect the compressor from the power supply.

5.AVOID DANGEROUS ENVIRONMENTS

Do not use the compressor in damp or wet locations or expose it to rain. Keep the work area well lit. Provide adequate surrounding work space.

6.AVOID ACCIDENTAL STARTING

Make sure the power supply switch is off before connecting to the power supply.

7.KEEP CHILDREN AWAY AND MAKE WORKSHOP CHILDPROOF

All visitors should be kept a safe distance from the work area. The power tools and workshop should be made childproof with padlocks, master switches or by removing starter keys.

8.DO NOT OVERLOAD THE COMPRESSOR

Before operating the compressor, check that the free air delivery (FAD) from the compressor is equal or greater than that of the air tool to be used.

9.AIR PRESSURE

Always check the air supply pressure is equal to or less than the compressor manufacturer’s maximum operating pressure.

10.NEVER LEAVE THE COMPRESSOR RUNNING UNATTENDED

Turn the power supply off. Do not leave the compressor until it coMES to a complete stop.

11.USE PROTECTIVE EQUIPMENT

Use safety glasses.

Use face or dust mask if working operations create dust.

12.CONNECT DUST EXTRATION EQUIPMENT

If the compressor is provided for the connection of dust extraction and collecting equipment, ensure these are connected and properly used.

13.DON’T ABUSE CORD

 Never carry compressor by cord or yank it to disconnect from receptacle. Keep cord from heat, oil or sharp edges.

14.DO NOT OVERREACH

Keep proper footing and balance at all times.

15.WARNING

The use of any accessory or attachment other than one recommended in this instruction manual may present a risk of personal injury.

免责声明：本文所用视频、图片、文字如涉及作品版权问题，请第一时间告知，我们将根据您提供的证明材料确认版权并立即删除内容。