发布信息 当前位置: 首页 > 中国智造 > 机械及行业设备 > 干燥设备 > 真空干燥机 >
供应双锥回转真空干燥设备(图)
供应双锥回转真空干燥设备(图)
供应双锥回转真空干燥设备(图)
供应双锥回转真空干燥设备(图)
供应双锥回转真空干燥设备(图)
销售热线:13601502261

供应双锥回转真空干燥设备(图)

address  江苏 常州市
品 牌: 华夏 
型 号: SZG-100 
单 价: 40000.00元/台 
起 订:  
供货总量:
发货期限: 自买家付款之日起 天内发货
有效期至: 长期有效
最后更新: 2013-05-24
即时询单   立即购买  加入购物车
 
 
产品详细说明 收藏此产品
加工定制: 类型: 双锥真空干燥机
品牌: 华夏 操作方式: 连续式
干燥介质: 空气 加热方式: 对流式
工作类型: 滚筒刮板 适用物料: 多种可用
温度范围: 高温式 功率: 0.75(kw)
外形尺寸: 2.160*0.8*1.750(m) 重量: 950(kg)
蒸汽压力: 0.1-0.3 型号: SZG-100

一、原理    

SZG 双锥回转真空干燥机为双锥形的回转罐体,罐内在真空状态下,向夹套内通入蒸汽或热水进行加热,热量通过罐体内壁与湿物料接触。湿物料吸热后蒸发的水分,通过真空泵经真空排气管被抽走。由于罐体内处于真空状态,且罐体的回转使物料不断的上下,内外翻动,故加快了物料的干燥速度,提高干燥效率,达到均匀干燥的目的。

、特点

双锥回转真空干燥机是集混合-干燥于一体的新型干燥机 ,将冷凝器 ,真空泵与干燥机配套 ,组成真空干燥装置 ( 如不需回收溶剂,冷凝器可不用 ) 。本机设计先进,内部结构简单,清扫容易,物料能全部排出 ,操作简便。能降低劳动强度,改善工作环境。同时因容器本身回转时物料亦转动,但器壁上不积料,故传热系数较高,干燥速率大,不仅节约能源 ,而且物料干燥均匀充分 ,质量好 。可广泛应用于制药、化工、食品、染料等行业的干燥 。符合药品管理规范“ GMP ”的要求。

、应用

本机适用于医药、食品、化工等行业的粉、粒状物料的真空干燥和混合,尤其适用有下列要求的物料:

◆不能接受高温的热敏性物料。

◆需回收溶剂和有毒气体的物料。

◆要求残留挥发物含量极低的物料。

◆容易氧化 , 有危险的物料。

◆对结晶形状有要求的物料。

、技术参数

型号 →名称 ↓罐内容积(L)原料容积(L)转速(rpm)电机功率(Kw)占地面积长 &tiMES; 宽(mm)回转高度(mm)罐内设计压力(Mpa)夹套设计压力(Mpa)工作温度(摄氏度)用冷凝器时、真空泵型号、功率不用冷凝器时、真空泵型号、功率重量(Kg)
100
350
500
750
1000
1500
2000
3500
4500
5000
100
350
500
750
1000
1500
2000
3500
4500
5000
≤50
≤175
≤250
≤ 375
≤ 500
≤ 750
≤ 1000
≤ 1750
≤2250
≤ 2500
3~13
6
5
4
4
4
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
2160×800
2160&tiMES;800
2350×800
2560×1000
2860×1300
3060×1300
3260×1400
3760×1800
3960×2000
4400×2500
1750
2100
2250
2490
2800
2940
2990
3490
4100
4200
-0.1~0.15
≤ 0.3
罐内 ≤ 85 夹套 ≤140
2X-15A 2Kw
2X-15A 2Kw
2X-30A 3Kw
2X-30A 3Kw
2X-70A 5.5Kw
JZJX300-8 7Kw
JZJX300-4 9.5Kw
JZJX600-8 11Kw
JZJX600-4 20.5Kw
JZJX600-4 22Kw
SK-0.4 1.5Kw
SK-0.4 1.5Kw
SK-0.8 2.2Kw
SK-2.7B 4Kw
SK-2.7B 4Kw
SK-3 5.5Kw
SK-6 11Kw
SK-6 11Kw
SK-9 15Kw
SK-10 18.5Kw
800
1100
1200
1500
2800
3300
3600
6400
7500
8600

注:对干燥前后容积变化很大的物料,其装料系数可适当加大或缩小。

SZG Double Conical Revolving Vacuum Dryer

1,Principles    

SZG Double Conical rotary vacuum dryer is a double conical rotary cylinder, under the vacuum state in the cylinder,steam or hot water is put into the jacket to do the heating .Then the heat will contact the wet raw material through the inner wall of the cylinder, The mois-ture from the evaporated material will be absorbed by the vacuum pump through vacuum exhausting pipes .The rotating of the cylinder makes the raw materials truning over up and down from inner to outer constantly ,Thus the drying speed is fastened and the drying efficiency is improved and the purpose of uniform drying can be achieved.

2,Features    

The double conical rotary vacuum dryer is a new type of dryer which can do mixing a nd drying at the same time . The whole set is made up of condenser,vacuum pump and drying device (If the solvent needn't to be recycled, the condenser may not be used) . With advanced design and simple structure , the dryer is easy to clean and operate . The material can be fully discharged . So , It's possible to reduce the labor strength and improve the working environment . Besides , rotating with the cylinder itself at the time, no raw material will be accumulated on the inner wall of the cylinder. As a result , heat-transmitting efficiency is high and the drying speed is high , too . It can not only save energy , but also make the material dried uniformly and fully with a high quality,So this dryer can be widely used in phamaceutical industry,chemical industry,foodstuff, dyestuff, etc .It's in conformity with the requirements of "GMP".

3,Applications

This machine is suitable for the vacuum mixing and drying of powder or granule raw materials in pharmaceutical industry, Chemical industry, food industry, etc,especially for the following materials:

◆ Themal sensitive raw materials that can not stand high temperature.

◆ Materials with solvent and dangerous gases to be collected.

◆ Materials that are dangerous and easy to oxidize.

◆ Materials that require low content of volatile residual.

◆ Materials that have special requirements for crystal shape.

 

4,Technical parameter   

Model→Name ↓Volume inside the tank (L)Volume to fill raw material (L)Rotary rate (rpm)Power of motor (Kw)Occupied area L × W(mm)Rotating height (mm)Designed pressure inside the tank (Mpa)Designed pressure of jacket (Mpa)Working temperature ( ℃ )When useing condenser,model and power of vacuum pumpWhen not using condenser,model and power of vacuum pumpWeight(Kg)
100
350
500
750
1000
1500
2000
3500
4500
5000
100
350
500
750
1000
1500
2000
3500
4500
5000
≤50
≤175
≤250
≤ 375
≤ 500
≤ 750
≤ 1000
≤ 1750
≤2250
≤ 2500
3~13
6
5
4
4
4
0.75
1.1
1.5
2.2
3
4
5.5
7.5
11
15
2160×800
2160×800
2350×800
2560×1000
2860×1300
3060×1300
3260×1400
3760×1800
3960×2000
4400×2500
1750
2100
2250
2490
2800
2940
2990
3490
4100
4200
-0.1~0.15
≤ 0.3
In the tank ≤ 85 In the jacket≤140
2X-15A 2Kw
2X-15A 2Kw
2X-30A 3Kw
2X-30A 3Kw
2X-70A 5.5Kw
JZJX300-8 7Kw
JZJX300-4 9.5Kw
JZJX600-8 11Kw
JZJX600-4 20.5Kw
JZJX600-4 22Kw
SK-0.4 1.5Kw
SK-0.4 1.5Kw
SK-0.8 2.2Kw
SK-2.7B 4Kw
SK-2.7B 4Kw
SK-3 5.5Kw
SK-6 11Kw
SK-6 11Kw
SK-9 15Kw
SK-10 18.5Kw
800
1100
1200
1500
2800
3300
3600
6400
7500
8600

 

 

Notes:

For raw material,if its volume has great change before and after dry ,then its filling coefficient may be increased or decreased suitably.

免责声明:本文所用视频、图片、文字如涉及作品版权问题,请第一时间告知,我们将根据您提供的证明材料确认版权并立即删除内容。

相关评价
 
更多本企业其它产品
  •   联系TA            进入集群
  • 联系人: 陈昌龙(先生)